Commercial Pressure Washing for Brick is one of the jobs we do most often in Kentucky. Typical jobs cost $400-$2,000, and you approve the price before we begin. With brick, the right approach is low-pressure wash.
How we clean it
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
Caring for brick
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
Is it time for commercial pressure washing for brick?
- Dirty entrances and walkways
- Stained building walls and signs
- Gum, grease and spills around doors
- Customer or tenant complaints
- Health or property manager inspections coming up
Where the grime comes from
- Heavy foot traffic
- Vehicle traffic and drips
- Food and grease near restaurants
- Pollution and weather
Safe steps for homeowners
- Sweep entrances daily
- Clean up spills right away
- Keep dumpster areas closed and clean
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Wash water reaching storm drains, which can violate local stormwater rules
- Slips and liability during business hours
- Damaging signs, windows and finishes
What happens on the day
- Survey the property and plan around your hours
- Set up signs and control wash water
- Pre-treat stains, gum and grease
- Clean walls and flatwork with the right pressure
- Final walkthrough and maintenance schedule
Typical commercial pressure washing for brick prices
What moves the price:
- Area and number of buildings
- Scheduling: early-morning, overnight or weekend work
- Whether wash water has to be recovered under local stormwater rules
- Frequency: recurring service is usually priced lower per visit
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Exterior Mold & Mildew Removal for Brick
- Pre-Paint Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Commercial Pressure Washing for Brick in Kentucky
Businesses in Kentucky typically schedule exterior cleaning in spring and fall, with entrances and high-traffic walkways cleaned more often.
We cover 175 cities and towns across Kentucky. Find commercial pressure washing for brick in your city:
- Louisville
- Lexington
- Lexington-Fayette
- Meads
- Bowling Green
- Owensboro
- Covington
- Richmond
- Georgetown
- Florence
- Hopkinsville
- Nicholasville
Commercial Pressure Washing for Brick: frequently asked questions
How much does commercial pressure washing for brick cost in Kentucky?
Commercial Pressure Washing for Brick typically costs $400-$2,000 for a typical small to mid-size commercial building, and usually takes Half a day to several days. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for commercial pressure washing for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is commercial pressure washing for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule commercial pressure washing for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.