The secret to sidewalk & walkway cleaning for exposed aggregate is using the right method, not the most pressure. In Kentucky, we match the cleaner and pressure to the surface so it comes out clean without damage. On exposed aggregate, the method we use is moderate-pressure wash.
Method and pressure
Cleaning solution: A concrete pre-treatment and degreaser as needed.
What to know about cleaning exposed aggregate
Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.
Avoid: High pressure at edges and cracks, which can pop out aggregate.
How often: Clean yearly; reseal every 2-3 years.
Is it time for sidewalk & walkway cleaning for exposed aggregate?
- Slippery paths after rain
- Green or black growth along shaded edges
- Gum, leaf stains or rust spots
- Uneven, blotchy color
What causes the dirt and stains
- Shade and moisture along the house
- Foot traffic and dropped food or gum
- Leaves and berries that stain
- Sprinkler overspray
Safe steps for homeowners
- Sweep away leaves before they stain
- Scrub small slippery patches with a stiff brush and a deck or patio cleaner
- Trim plants that keep paths shaded and damp
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Slipping on wet, treated surfaces
- Water and debris sprayed onto doors, windows and cars
- Lifting loose joint material between slabs
How we handle sidewalk & walkway cleaning for exposed aggregate
- Sweep and inspect
- Pre-treat growth and stains
- Clean with a surface cleaner
- Detail edges and steps
- Rinse and post-treat
Sidewalk & Walkway Cleaning for Exposed Aggregate cost in Kentucky
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for exposed aggregate
- Pressure Washing for Exposed Aggregate
- Driveway Cleaning for Exposed Aggregate
- Patio Cleaning for Exposed Aggregate
- Pool Deck Cleaning for Exposed Aggregate
- Concrete Sealing for Exposed Aggregate
- Oil Stain Removal for Exposed Aggregate
Sidewalk & Walkway Cleaning for Exposed Aggregate in Kentucky
In Kentucky, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.
We cover 175 cities and towns across Kentucky. Find sidewalk & walkway cleaning for exposed aggregate in your city:
- Louisville
- Lexington
- Lexington-Fayette
- Meads
- Bowling Green
- Owensboro
- Covington
- Richmond
- Georgetown
- Florence
- Hopkinsville
- Nicholasville
Sidewalk & Walkway Cleaning for Exposed Aggregate: frequently asked questions
How much does sidewalk & walkway cleaning for exposed aggregate cost in Kentucky?
Sidewalk & Walkway Cleaning for Exposed Aggregate typically costs $100-$250 for a typical front walk and side paths, and usually takes About 1 hour. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for sidewalk & walkway cleaning for exposed aggregate?
For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.
Is sidewalk & walkway cleaning for exposed aggregate safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule sidewalk & walkway cleaning for exposed aggregate?
Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.